0 of 11 Questions completed
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading…
You must sign in or sign up to start the quiz.
You must first complete the following:
0 of 11 Questions answered correctly
Time has elapsed
You have reached 0 of 0 point(s), (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
You must score 70% or higher to pass this quiz. Please try again!
Congratulations! You’ve passed the final quiz for the Passive House Construction Primer. Please proceed to the post-course survey to complete the course.
Your certificate of completion is now available under the “My Courses” section of your account, as well as on the landing page for this course. Please allow one business week for the processing of continuing education credits.
Fill in the blank: The final step in obtaining a good ventilation involves _____ the doors and windows to the opening to incorporate it into the exterior weather barrier and moisture-management system, as well as to ensure continuity of airtight layer.
Where ducts and vents puncture the airtight membrane, what can you use to create an airtight seal around them? Check all that apply
What method of insulation installation is typically preferred to form a continuous thermal layer?
Which of these types of insulation should be avoided whenever possible because it produces toxic gasses, creates a mess on the site and leaks through unsealed joints and openings? Check all that apply.
What are thermal bridges?
True or False: Passive House windows are typically triple paned, or triple glazed.
What is low-emissivity or low-e?
True or False: Exhaust-only ventilation is not an ideal strategy, as supply, or make-up air, remains uncontrolled and is driven by infiltration through cracks in the building exterior.
What are the advantages of installing an Energy Recovery Ventilator? Check all that apply. Check all that apply.
True or False: by reducing heating and cooling loads building owners can install smaller mechanical systems.
True or False: Energy models are created at the end of the project with design choices typically finalized and building systems fully operating?